Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
NiCr29Fe alloy is on the basis of Inconel 600 alloy, the chromium content increased to 30%, a new type of evaporator carbon content below 0.04% and the development of nickel base corrosion resistant alloy. It not only has excellent resistance to stress corrosion cracking ability, but also has high strength, good stability and excellent metallurgical processing capability. Characteristics, has been widely used in PWR nuclear power plant on the evaporator tube"
Corrosion-resisting Nickel-base alloy NiCr29Fe chemical composition
| Ni |
Cr |
Fe |
C |
Al |
Ti |
Mn |
Si |
Cu |
P |
S |
|
Balance |
30.39 |
8.88 |
0.023 |
0.22 |
0.26 |
0.23 |
0.07 |
0.02 |
0.006 |
0.002 |
NiCr29Fe alloy physical property:
NiCr29Fe density : 8.19g/cm
NiCr29Fe melting point: 1343-1377 degree
NiCr29Fe alloy mechanical property:
|
Yield strength |
Tensile strength |
Elongation |
|
350MPa |
700MPa |
45% |
NiCr29Fe alloy Existence of main products: Forging, bar, sheet, strip, ring, wire, bolts, spring
NiCr29Fe alloy chief application:
iCr29Fe alloy is mainly used for the material of nuclear power plant steam generator tubes in pressurized water reactor.
