Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
Nickel chromium alloy UNS N06601 is designed for a heat resistant, high temperature environment design, high strength, corrosion resistance and oxidation at high temperature and corrosive environment commonly used alloy material, has good oxidation resistance, anti carburizing resistance and sulphurizing performance. Under the environment of high temperature, oxidation resistance of the alloy is particularly prominent, has excellent resistance to oxidation skin off for the cyclic oxidation. Mechanical strength, but also have high easy forming, and has good processing properties and weldability.
UNS N06601 alloy chemical compsition:
|
alloy |
% |
Ni |
Cr |
Fe |
C |
Mn |
Si |
Cu |
Al |
P |
S |
|
UNS N06601 |
min |
58 |
21 |
|
|
|
|
|
1.0 |
|
|
|
max |
63 |
25 |
balance |
0.1 |
1.5 |
0.5 |
1 |
1.7 |
0.02 |
0.015 |
UNS N06601 alloy physical properties:
UNS N06601 alloy steel density : 8.1 g/cm3
UNS N06601 alloy steel Melting point: 1320-1370 degree
|
Alloy and state |
Strength of extension Rm N/mm2 |
Yield strength |
Extend rate A5 % |
Brinell hardness |
|
Annealing treatment |
650 |
300 |
30 |
- |
|
Solution treatment |
600 |
240 |
30 |
≤220 |
UNS N06601 alloy steel application area:
1. heat treatment plant tray, basket and fixture.
2. wire strand annealing and radiant tube, high speed gas burner, industrial furnace of mesh belt.
3. Catalytic reforming in ammonia and nitric acid production in the isolation tank support grid.
4. The components of the exhaust system
5. Combustion chamber of solid waste incineration
6. pipe supports and soot processing unit
7. exhaust system components
8. oxygen re heater
