Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
UNS N06625 alloy is based on molybdenum, niobium as mainly strengthening element , solid solution strengthened nickel base superalloy .UNS N06625 alloy has excellent resistance to corrosion and oxidation resistance. UNS N06625 good fatigue performance and stress corrosion resistance with from low to 980 degree temperature.Therefore, UNS N06625 can be widely used in manufacturing of aviation engine parts, aerospace structure parts and chemical equipment.Also because it’s machining and welding performance is good, can supply a variety of sheet, rod, tube, wire, strip and forgings.
UNS N06625 Similar grades: UNS N06625, W.Nr.2.4856, NiCr22Mo9Nb
|
C |
Cr |
Ni |
Co |
Mo |
Al |
Ti |
Nb |
Fe |
Mn |
Si |
P |
S |
Cu |
|
≤ |
≤ |
||||||||||||
|
≤0.10 |
20.0-23.0 |
balance |
≤1.00 |
8.0-10.0 |
0.40 |
0.40 |
3.15-4.15 |
5.00 |
0.50 |
0.50 |
0.015 |
0.015 |
0.07 |
|
UNS N06625 alloy steel bar |
950-1030 degree air cooling or water cooling,or 1090-1200 degree air cooling or water cooling solution treatment |
|
UNS N06625 alloy steel plate/sheet |
950-1030 degree Air cooling, or 1090-1200 degree air cooling |
|
UNS N06625 alloy steel pipe/tube |
Recommend the annealing temperature: 960-1030 degree,air cooling or water cooling. |
Specifications and supply condition: we Can supply UNS N06625 alloy steel bar D25-80mm and UNS N06625 alloy steel plate/sheet thickness 0.8 - 10.5mm. We also can supply D6 - 40mm seamless pipe or welded pipe.
UNS N06625 alloy steel delivery condition : without heat treatment but the car light or polished delivery; sheet/plate after solution, finishing supply, pipe after solution, pickling (or bright annealing) delivery.
UNS N06625 alloy steel properties
Thermal properties of elating temperature range 1290-1350 degree.
UNS N06625 alloy steel Density : 8.44g/cm3.
UNS N06625 alloy steel is no magnetic alloy.
UNS N06625 alloy Mechanical properties
| Product |
Tensile strength /MPa |
Yield strength MPa |
elongation/% |
Hardness |
|
Not less than |
||||
|
Alloy Bar |
830 |
410 |
30 |
HB≤290 |
|
Alloy plate/sheet |
830 |
410 |
30 |
HV≤305 |
|
Alloy Pipe/tube |
825 |
415 |
35 |
HRC≤25 |
