Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
UNS N06690 alloy is on the basis of Inconel 600 alloy, the chromium content increased to 30%, a new type of evaporator carbon content below 0.04% and the development of nickel base corrosion resistant alloy. It not only has excellent resistance to stress corrosion cracking ability, but also has high strength, good stability and excellent metallurgical processing capability. Characteristics, has been widely used in PWR nuclear power plant on the evaporator tube"
Corrosion-resisting Nickel-base alloy UNS N06690 chemical composition
| Ni |
Cr |
Fe |
C |
Al |
Ti |
Mn |
Si |
Cu |
P |
S |
|
Balance |
30.39 |
8.88 |
0.023 |
0.22 |
0.26 |
0.23 |
0.07 |
0.02 |
0.006 |
0.002 |
UNS N06690 alloy physical property :
UNS N06690 density : 8.19g/cm
UNS N06690 melting point: 1343-1377 degree
UNS N06690 alloy mechanical property:
|
Yield strength |
Tensile strength |
Elongation |
|
350MPa |
700MPa |
45% |
UNS N06690 alloy Existence of main products: Forging, bar, sheet, strip, ring, wire, bolts, spring
UNS N06690 alloy chief application:
UNS N06690 alloy is mainly used for the material of nuclear power plant steam generator tubes in pressurized water reactor.
