Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
Product: Cold reduced, hot rolled Dent resistant Non-Bake-Hardenable steel for automotive useGrade: 210A,
SAE J2340 210A steel standard: SAE J2340
SAE J2340 210A steel condition: Coil,strip,sheet,wide strip,slit wide strip, cut lengths obtained from slit wide strip
SAE J2340 210A steel surface : uncoated, coated by hot dipping, electroplating, vapor deposition of zinc/aluminum, oiled
SAE J2340 210A steel type: Dent resistant Non-Bake-Hardenable
| Grade |
P max |
S max |
Cu max |
Ni max |
Cr max |
Mo max |
|
SAE J2340 210A |
0.100 |
0.015 |
0.20 |
0.20 |
0.15 |
0.060 |
SAE J2340 210A steel Mechanical properties
| Grade |
Yield strength MPa min |
Tensile strength Rm MPa min |
N value min |
Yield strength after 2% strain MPa min |
Yield strength after strain and Bake MPa min |
|
SAE J2340 210A |
210 |
330 |
0.19 |
245 |
- |
JOIN-WIN STEEL have more than 2000 tons SAE J2340 210A steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Other cold rolled automotive steel grads in the standard SAE J2340
SAE J2340 180A Dent resistant Non-Bake-Hardenable steel,
SAE J2340 180B Dent resistant Bake-Hardenable steel,
SAE J2340 210B Dent resistant Bake-Hardenable steel,
SAE J2340 250A Dent resistant Non-Bake-Hardenable steel,
SAE J2340 250B Dent resistant Bake-Hardenable steel,
SAE J2340 280A Dent resistant Non-Bake-Hardenable steel,
SAE J2340 280B Dent resistant Bake-Hardenable steel
