Tel : 0086-0371-86172891

HX340BD Hot dip Zinc-Aluminium alloy coating (ZA) steel

Share:

Product: Continuously hot-dip Zinc-Aluminium alloy (ZA) coated strip and sheet of steels with high yield strength for cold forming, Bake-hardening steel(B)

Grade: HX340BD+ZA
HX340BD+ZA steel usage: mainly used where cold formability and corrosion resistance for a defined minimum yield strength are the most important factors.

HX340BD+ZA steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular Zinc-Aluminium alloy coating)

HX340BD+ZA steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)

HX340BD+ZA steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)

HX340BD+ZA steel Coil/strip/sheet coating mass: ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
HX340BD+ZA steel Coil/strip/sheet coating: Zinc-Aluminium alloy (ZA) : Application of an Zinc-Aluminium coating by immersing the prepared strip in a molten bath of Zinc-Aluminium. The composition of the bath is 5% of aluminium, small amount of mischmetal and the balance zinc
EN10346 HX340BD+ZA steel suitable size: Thickness 0.3mm-3.0mm

HX340BD+ZA steel chemical composition

Grade Material No. C max Si max Mn max P max S max Al min Ti max Nb max
HX340BD+ZA 1.0945+ZA 0.11 0.50 0.80 0.12 0.025 0.010 0.12 0.09

HX340BD+ZA steel Mechanical properties
Grade Material No. R90 min N90
min
Yield Strength MPa Tensile strength MPa Elongation A80 min Bake-Hardenning-Index BH2 MPa min
HX340BD+ZA 1.0945+ZA - - 340-400 440-520 24 30

JOIN-WIN STEEL have more than 2000 tons HX340BD+ZA steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.

Other steel grades of Hot dip Zinc-Aluminium alloy coating (ZA) steel with high proof strength for cold forming in EN10346 Standard
HX160YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel ,
HX180YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel ,
HX180BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel ,
HX220BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX220YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX260BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX260YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX300YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX300BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX260LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX300LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX340LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX380LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX420LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX460LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX500LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel

If necessary, please leave your message, we will contact you as soon as possible, thank you!

Name:
Email:
Tel:
Message: