Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
Product: Continuously hot-dip Zinc-Aluminium alloy (ZA) coated strip and sheet of steels with high yield strength for cold forming, Interstitial free steel(IF), steel whose composition is controlled to achieve improved R and N values.
Grade: HX220YD+ZA
HX220YD+ZA steel usage: mainly used where cold formability and corrosion resistance for a defined minimum yield strength are the most important factors.
HX220YD+ZA steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular Zinc-Aluminium alloy coating)
HX220YD+ZA steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
HX220YD+ZA steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
HX220YD+ZA steel Coil/strip/sheet coating mass: ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
HX220YD+ZA steel Coil/strip/sheet coating: Zinc-Aluminium alloy (ZA) : Application of an Zinc-Aluminium coating by immersing the prepared strip in a molten bath of Zinc-Aluminium. The composition of the bath is 5% of aluminium, small amount of mischmetal and the balance zinc
EN10346 HX220YD+ZA steel suitable size: Thickness 0.3mm-3.0mm
|
Grade |
Material No. |
C max |
Si max |
Mn max |
P max |
S max |
Al min |
Ti max |
Nb max |
|
HX220YD+ZA |
1.0923+ZA |
0.01 |
0.20 |
0.90 |
0.08 |
0.025 |
- |
0.12 |
0.09 |
HX220YD+ZA steel Mechanical properties
|
Grade |
Material No. |
R90 min |
N90 |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
|
HX220YD+ZA |
1.0923+ZA |
1.5 |
0.17 |
220-280 |
340-420 |
32 |
JOIN-WIN STEEL have more than 2000 tons HX220YD+ZA steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Other steel grades of Hot dip Zinc-Aluminium alloy coating (ZA) steel with high proof strength for cold forming in EN10346 Standard
HX160YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel ,
HX180YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel ,
HX180BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel ,
HX220BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX260BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX260YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX300YD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX300BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX340BD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX260LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX300LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX340LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX380LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX420LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX460LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel,
HX500LAD+ZA hot-dip Zinc-Aluminium alloy coating (ZA) steel
