Tel : 0086-0371-86172891
Product: Continuously hot-dip zinc-Iron coated low carbon steels strip and sheet for cold forming
Grade: DX56D+ZF,
DX56D+ZF steel quality: Drawing quality
DX56D+ZF steel coating finish:
N (Normal spangle), M (Minimized spangle), R (Regular zinc-iron alloy coating)
DX56D+ZF steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
DX56D+ZF steel Coil/strip/sheet surface treatment:
C (Chemical passivation),O (oiling), CO(Chemical passivation and oiling), S ( Seales), P(Phosphated), U(Untreated)
DX56D+ZF steel Coil/strip/sheet coating mass: ZF100, ZF200
DX56D+ZF steel Coil/strip/sheet coating: ZF ( application of a zinc coating by immersing the prepared strip in a molten bath containing a zinc content of at least 99% and a subsequent annealing which produces an iron-zinc coating with an iron content of normally 8% to 12%)
EN10346 DX56D+ZF steel suitable size: Thickness 0.3mm-3.0mm
Grade |
Material No. |
C |
Si |
Mn |
P |
S |
Ti |
DX56D+ZF |
1.0322+ZF |
0.12 |
0.50 |
0.60 |
0.10 |
0.045 |
0.30 |
DX56D+ZF steel Mechanical properties
Grade |
Material No. |
R90 min |
N90 |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
DX56D+ZF |
1.0322+ZF |
1.7 |
0.20 |
120-180 |
260-350 |
JOIN-WIN STEEL have more than 2000 tons DX56D+ZF steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Other steel grades of Hot dip Zinc-Iron alloy coating (ZF) steel in EN 10346 Standard
DX51D+ZF Hot dip Zinc-Iron alloy coating (ZF) steel ,
DX52D+ZF Hot dip Zinc-Iron alloy coating (ZF) steel ,
DX53D+ZF Hot dip Zinc-Iron alloy coating (ZF) steel ,
DX54D+ZF Hot dip Zinc-Iron alloy coating (ZF) steel ,
DX57D+ZF Hot dip Zinc-Iron alloy coating (ZF) steel ,