Tel : 0086-0371-86172891
Product: Hot-dip 55% aluminium-zinc alloy-coated steel sheet and strip Grade: SGLH440
SGLH440 steel quality: For commercial use of high strength class
SGLH440 steel coating surface finish: Regular Spangle, S(skin-pass)
SGLH440 steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
SGLH440 steel Coil/strip/sheet chemical treatment:
C (Chromate treatment),O (oied),X(Unoiled), NC(Chromate-free treatment), M ( Untreatment),
SGLH440 steel Coil/strip/sheet coating mass:
AZ70, AZ90, AZ120, AZ150, AZ170, AZ185, AZ200
SGLH440 steel Coil/strip/sheet coating:
The aluminum-zinc alloy composition by mass fraction is normally 55% aluminium, 1.6% Silicon and the balance zinc.
SGLH440 steel Applicable nominal thickness : 1.6mm or over up to and include 2.3mm
SGLH440 steel chemical composition
Grade |
C max |
Mn |
P max |
S max |
SGLH440 |
0.25 |
2.00 |
0.20 |
0.05 |
Grade |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
|
SGLH440 |
335 min |
440 min |
18 |
JOIN-WIN STEEL have more than 2000 tons SGLH440 steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Other Aluminium -zinc alloy coating steel grade in standard JIS G3321:
SGLH490 Aluminium -zinc alloy coating steel,
SGLHC Aluminium -zinc alloy coating steel,
SGLH400 Aluminium -zinc alloy coating steel
SGLH540 Aluminium -zinc alloy coating steel,