Tel : 0086-0371-86172891
Product: Hot-dip 55% aluminium-zinc alloy-coated steel sheet and strip Grade: SGLHC
SGLHC steel quality: For commercial use
SGLHC steel coating surface finish: Regular Spangle, S(skin-pass)
SGLHC steel Coil/strip/sheet surface quality:
A (As coated surface), B (Improved surface),C (Best quality surface)
SGLHC steel Coil/strip/sheet chemical treatment:
C (Chromate treatment),O (oied),X(Unoiled), NC(Chromate-free treatment), M ( Untreatment),
SGLHC steel Coil/strip/sheet coating mass:
AZ70, AZ90, AZ120, AZ150, AZ170, AZ185, AZ200
SGLHC steel Coil/strip/sheet coating:
The aluminum-zinc alloy composition by mass fraction is normally 55% aluminium, 1.6% Silicon and the balance zinc.
SGLHC steel Applicable nominal thickness : 1.6mm or over up to and include 2.3mm
SGLHC steel chemical composition
Grade |
C max |
Mn |
P max |
S max |
SGLHC |
0.15 |
0.80 |
0.05 |
0.05 |
Grade |
Yield Strength MPa |
Tensile strength MPa |
Elongation A80 min |
|
SGLHC |
205 min |
270 min |
- |
JOIN-WIN STEEL have more than 2000 tons SGLHC steel stock source each month. We can meet our customer's most of quantity and technical request. Based on these stock source, our advantage industry spread into steel process like : cutting(on width and length), drawing, repacking, and so on.
Other Aluminium -zinc alloy coating steel grade in standard JIS G3321:
SGLH490 Aluminium -zinc alloy coating steel,
SGLH400 Aluminium -zinc alloy coating steel
SGLH440 Aluminium -zinc alloy coating steel,
SGLH540 Aluminium -zinc alloy coating steel,