Tel :
Tel :
ASK:
ANSWER: EN 10130 is the European standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600mm for cold forming, with a min thickness of 0.35mm and unless otherwise agreed at the time of inquiry and order, equal to or less than 3mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet.
DC01 steel coil,strip, sheet thickness is from 0.35mm to 3mm.
DC01 cold rolled steel has A and B surface quality level.
DC01 cold rolled steel has fore surface finish: b (bright), g(semi-bright), m (normal), r(rough)
DC01 steel is non alloy quality steel, and it’s steel material No. Is 1.0330
The exact mechanical property requirements of DC01 is :Yield strength is max 280MPa, tensile strength is min 270-410MPa, total Elongation in 80mm is min 28%.
DC01 carbon composition is max 0.12%
