Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK:
ANSWER: S460N Grade E is the material in International standard ISO 630-3. ISO 630-3 specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the Normalized-rolled delivery conditions. ISO 630-3 applies to steel plates rolled on a reversing mill, wide flats, hot rolled sections and bars, which are intended for use in heavily loaded parts of welded or bolted structures.
The delivery condition of S460N Grade E steel is Normalized rolled
S460N Grade E steel flat and long products apply to thickness not more than 3mm-250mm
The “S” in S460N Grade E means “Structural” “N” means “Normalized” So, S460N Grade E is an fine grain Structural weldable Normalized rolled quality steel grade
S460N Grade E steel apply for the sheet, plate, strip, wide flats and flats, sections, Bars and rods products.
S460N Grade E steel plates can be produced into heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks. And so on.
S460N Grade E impact test temperature is -40°C
Max CEV in % for nominal produce of S460N Grade E is : 0.53
Yield strength of S460N Grade E steel is min 370MPa
Tensile strength of S460N Grade E steel is 510-720MPa
Elongation of S460N Grade E steel not more than 16%.
