Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK:
ANSWER: SG460 Grade C is the material in International standard ISO 630-3. ISO 630-3 specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the Normalized-rolled delivery conditions. ISO 630-3 applies to steel plates rolled on a reversing mill, wide flats, hot rolled sections and bars, which are intended for use in heavily loaded parts of welded or bolted structures.
The delivery condition of SG460 Grade C steel is Normalized rolled
SG460 Grade C steel flat and long products apply to thickness not more than 100mm
The “S” in SG460 Grade C means “Structural”
SG460 Grade C steel apply for the sheet, plate, strip, wide flats and flats, sections, Bars and rods products.
SG460 Grade C steel plates can be produced into heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks. And so on.
SG460 Grade C impact test temperature is 0°C
Max CEV in % for nominal produce of SG460 Grade C is : 0.45
Yield strength of SG460 Grade C steel is min 420MPa
Tensile strength of SG460 Grade C steel is 570-720MPa
Elongation of SG460 Grade C steel not more than 19%.
