Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK:
ANSWER: EN 10130 is the European standard applies to cold rolled uncoated low carbon steel flat products in rolled widths equal to or over 600mm for cold forming, with a min thickness of 0.35mm and unless otherwise agreed at the time of inquiry and order, equal to or less than 3mm, delivered in sheet, coil, slit coil, or cut lengths obtained from slit coil or sheet.
DC06 steel coil,strip, sheet thickness is from 0.35mm to 3mm.
DC06 cold rolled steel has A and B surface quality level.
DC06 cold rolled steel has fore surface finish: b (bright), g(semi-bright), m (normal), r(rough)
DC06 steel is alloy quality steel, and it’s steel material No. Is 1.0873
The exact mechanical property requirements of DC06 is :Yield strength is max 170MPa, tensile strength is min 270-330MPa, total Elongation in 80mm is min 41%. r90 min 2.1, n90 min 0.220
DC06 carbon composition is max 0.02%
