Tel : 0086-0371-86172891
ASK:
ANSWER:DX51D+ZF is a hot dip Zinc-iron coated steel grade in European standard EN10346 ,DX51D+ZF is low carbon steel for cold forming bending and profiling quality material, The material No. of DX51D+ZF is 1.0917+ZF.
+ZF means hot dip Zinc-iron coating. The zinc content of the bath is at least 99% . So DX51D+ZF means hot dip zinc-iron coated, low carbon material steel.
DX51D+ZF material steel have coil, strip, sheet condition, thickness is from 0.2mm-3mm.
DX51D+ZF steel coating finish is N(Normal spangle) or M(Minimized spangle)
DX51D+ZF steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
DX51D+ZF steel Surface treatment C (chemically passivated) , O (oiled), CO (chemically passivated and oiled) , P (phosphate) , PO (phosphate and oiled), S (sealed)
DX51D+ZF steel Coating mass are: ZF100, ZF120
DX51D+ZF steel mechanical property:
Tensile strength should be 270-500MPa
Elongation A80 should be not less than 22%