Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK:
ANSWER:DX52D is a steel grade in European standard,DX52D is drawing quality steel material, The material No. of DX52D is 1.0918. DX52D's Carbon composition content is less than 0.12%, it belongs to low carbon material, used for cold forming.
+Z means hot dip Zinc coating. The zinc content is at least 99% . So DX52D+Z material steel have coil, strip, sheet condition, thickness is from 0.2mm-3mm.
DX52D+Z steel coating finish is N(Normal spangle) or M(Minimized spangle)
DX52D+Z steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
DX52D+Z steel Surface treatment C (chemically passivated) , O (oiled), CO (chemically passivated and oiled) , P (phosphate) , PO (phosphate and oiled), S (sealed)
DX52D+Z steel Coating mass are: Z60/Z80/Z100/Z410/Z200/Z225/Z275/Z350/Z450/Z600
DX52D+Z steel mechanical property:
Yield strength should be between 140-300MPa
Tensile strength should be between 270-420MPa
Elongation A80 should be not less than 26%
