Tel : 0086-0371-86172891
ASK :
ASNSWER: DX56D+AS is a Hot dip Aluminized steel material grade under EN10346 standard, whose material No. is 1.0322+AS. DX56D+AS also should be called Aluminium-Silicon(AS) steel, because it’s surface coating is 92%-89% Al + 8%-11% Si.
DX56D+AS Aluminium-Silicon(AS) Coating masses are : AS60, AS80, AS100, AS120, AS150. However the Surface treatment are C,O,CO,U,P, PO, S
DX56D+AS steel chemical composition % by mass max
C |
Si |
Mn |
P |
S |
Ti |
0.12 |
0.50 |
0.60 |
0.10 |
0.045 |
0.30 |
DX56D+AS steel Yield Strength should be 120-180MPa, tensile strength should be 260-350MPa, and Elongation A80 should be not less than 39%, R90 should be not less than 1.7, N90 should be not less than 0.20.