What’s HX380LAD+AZ steel ?

Share:

Ask:

What's HX380LAD+AZ steel ?

ANSWER:HX380LAD is a steel grade in European standard EN10346, HX380LAD is low alloy/micro-alloyed quality steel material (the steel containing one or more of alloying elements Nb, Ti and V achieve required proof strength levels ), The material No. of HX380LAD is 1.0934.

+AZ means Application of an Aluminium-zinc coating by immersing the prepared strip in a molten bath of Aluminium-zinc-silicon. The composition of the bath is 55% of aluminium,1.6% of silicon and the balance zinc. So HX380LAD+AZ means hot dip Aluminium-Zinc coated, cold forming quality material with low alloy/micro-alloyed quality.

HX380LAD+AZ material steel have coil, strip, sheet condition, thickness is from 0.2mm-3mm.

HX380LAD+AZ steel coating finish is N(Normal spangle) or M(Minimized spangle)

HX380LAD+AZ steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)

HX380LAD+AZ steel Surface treatment C (chemically passivated) , O (oiled), CO (chemically passivated and oiled) , P (phosphate) , PO (phosphate and oiled), S (sealed)


HX380LAD+AZ steel Coating mass are: AZ100, AZ150, AZ185

HX380LAD+AZ steel mechanical property:
Proof strength should be 380-480MPa
Tensile strength should be 440-560MPa
Elongation A80 should be not less than 19%

  • Source: Abstract
  • Editor: Shirley

If necessary, please leave your message, we will contact you as soon as possible, thank you!

Name:
Email:
Tel:
Message: