Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
Ask: /p>
ANSWER:HX460LAD is a steel grade in European standard EN10346, HX460LAD is low alloy/micro-alloyed quality steel material (the steel containing one or more of alloying elements Nb, Ti and V achieve required proof strength levels ), The material No. of HX460LAD is 1.0990.
+AZ means Application of an Aluminium-zinc coating by immersing the prepared strip in a molten bath of Aluminium-zinc-silicon. The composition of the bath is 55% of aluminium,1.6% of silicon and the balance zinc. So HX460LAD+AZ means hot dip Aluminium-Zinc coated, cold forming quality material with low alloy/micro-alloyed quality.
HX460LAD+AZ material steel have coil, strip, sheet condition, thickness is from 0.2mm-3mm.
HX460LAD+AZ steel coating finish is N(Normal spangle) or M(Minimized spangle)
HX460LAD+AZ steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
HX460LAD+AZ steel Surface treatment C (chemically passivated) , O (oiled), CO (chemically passivated and oiled) , P (phosphate) , PO (phosphate and oiled), S (sealed)
HX460LAD+AZ steel Coating mass are: AZ100, AZ150, AZ185
HX460LAD+AZ steel mechanical property:
Proof strength should be 460-560MPa
Tensile strength should be 500-640MPa
Elongation A80 should be not less than 15%
