Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
Ask:
ANSWER:HX460LAD is a steel grade in European standard EN10346, HX460LAD+ZA is low alloy/micro-alloyed quality steel material (the steel containing one or more of alloying elements Nb, Ti and V achieve required proof strength levels ), The material No. of HX460LAD is 1.0990.
+ZA means Hot-dip Zinc-aluminium alloy coated, application of a Zinc-aluminium coating by immersing the prepared strip in a molten bath of zinc-aluminum-aluminium. The composition of the bath is approximately 5% aluminum, small amounts of mischmetal and the balance zinc. So HX460LAD+ZA means hot dip Zinc-aluminium coated, cold forming quality material with low alloy/micro-alloyed quality.
HX460LAD+ZA material steel have coil, strip, sheet condition, thickness is from 0.2mm-3mm.
HX460LAD+ZA steel coating finish is N(Normal spangle) or M(Minimized spangle)
HX460LAD+ZA steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
HX460LAD+ZA steel Surface treatment C (chemically passivated) , O (oiled), CO (chemically passivated and oiled) , P (phosphate) , PO (phosphate and oiled), S (sealed)
HX460LAD+ZA steel Coating mass are: ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
HX460LAD+ZA steel mechanical property:
Proof strength should be 460-560MPa
Tensile strength should be 500-640MPa
Elongation A80 should be not less than 15%
