Tel : 0086-0371-86172891
Ask:
ANSWER:S280GD is a steel grade in European standard EN10346, S280GD is bending and profiling quality steel material, The material No. of S280GD is 1.0244. S280GD's Carbon composition content is less than 0.18%, it belongs to low carbon material, used for cold forming.
+ZA means Hot-dip Zinc-aluminium alloy coated, application of a Zinc-aluminium coating by immersing the prepared strip in a molten bath of zinc-aluminum-aluminium. The composition of the bath is approximately 5% aluminum, small amounts of mischmetal and the balance zinc. So S280GD+ZA means hot dip Zinc-aluminium coated, low carbon for cold forming, bending and profiling quality, Flat product steel.
S280GD+ZA material steel have coil, strip, sheet condition, thickness is from 0.2mm-3mm.
S280GD+ZA steel coating finish is N(Normal spangle) or M(Minimized spangle)
S280GD+ZA steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
S280GD+ZA steel Surface treatment C (chemically passivated) , O (oiled), CO (chemically passivated and oiled) , P (phosphate) , PO (phosphate and oiled), S (sealed)
S280GD+ZA steel Coating mass are: ZA095, ZA130, ZA185, ZA200, ZA255, ZA300
S280GD+ZA steel mechanical property:
Yield strength should be not less than 280MPa
Tensile strength should be not less than 360MPa
Elongation A80 should be not less than 18%