Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK:
ANSWER: S355ML is the material in International standard EN10025-4. EN10025-4 specifies the technical delivery conditions for flat an long products of hot rolled weldable fine grain structural steels in the thermomechanical rolled delivery condition in the grades and qualities in the steel products whose thickness not more than 250mm.
The delivery condition of S355ML steel is thermomechanical rolled
S355ML steel flat and long products apply to thickness not more than 3mm-150mm
The “S” in S355ML means “Structural” “M” means “thermomechanical” So, S355ML is an Structural weldable thermomechanical rolled quality steel grade
S355ML steel apply for the sheet, plate, strip, wide flats and flats, sections, Bars and rods products.
S355ML steel plates can be produced into heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks. And so on.
S355ML impact test temperature is -50°C
The material No. Of S355ML is 1.8834
Yield strength of S355ML steel is min 320MPa
Tensile strength of S355ML steel is 430-630MPa
Elongation of S355ML steel not more than 22%.
