Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK:
ANSWER: S500M Grade L is the material in International standard ISO 630-3. ISO 630-3 specifies requirements for flat and long products of hot rolled weldable fine grain structural steels in the thermomechanical-rolled delivery conditions. ISO 630-3 applies to steel plates rolled on a reversing mill, wide flats, hot rolled sections and bars, which are intended for use in heavily loaded parts of welded or bolted structures.
The delivery condition of S500M Grade L steel is thermomechanical rolled
S500M Grade L steel flat and long products apply to thickness not more than 3mm-150mm
The “S” in S500M Grade L means “Structural” “M” means “thermomechanical” So, S500M Grade L is an fine grain Structural weldable thermomechanical rolled quality steel grade
S500M Grade L steel apply for the sheet, plate, strip, wide flats and flats, sections, Bars and rods products.
S500M Grade L steel plates can be produced into heavily loaded parts of welded structures such as bridges, flood gates, storage tanks, water supply tanks. And so on.
S500M Grade L impact test temperature is -50°C
Max CEV in % for nominal produce of S500M Grade L is : 0.47
Yield strength of S500M Grade L steel is min 450MPa
Tensile strength of S500M Grade L steel is 560-770MPa
Elongation of S500M Grade L steel not more than 15%.
