Tel : 0086-0371-86172891
ASK:
SGCD1 is the base material SPCD which are equally coated on both surfaces by hot dip zinc coating process. The composition by mass fraction is 97% or over zinc (provided that the aluminium content is usually 0.3% or less). The Application of SGCD1 is for drawing use class one.
SGCD1 steel Applicable thickness is 0.40mm or over up to and including 2.30mm
SGCD1 steel coating shall be classified into 2 types: non-alloyed coating and alloyed coating. Non alloyed coating mass are: Z06/Z08/Z10/Z12/Z14/Z18/Z20/Z22/Z25/Z27/Z35/Z37/Z45/Z60, Alloyed coating are: F04/F06/F08/F10/F12/F18
SGCD1 steel surface finish for non-alloyed coating : R (Regular spangle) and Z(Minimized spangle)
SGCD1 steel surface chemical treatment are: C(Chromate treatment), P(Phosphate treatment), NC(Chromate-free treatment), NP(Chromate-free phosphate treatment), M(Untreated)
SGCD1 steel tensile test characteristics:
yield strength : not specified
tensile strength should be not less than 270MPa
Elongation should be not less than 34%