Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
Ask:
ANSWER:SGLC400 is a steel grade in Japanese standard JIS G 3321, SGLC400 is high strength general use quality steel material.The base material of SGLC400 is cold rolled steel sheet.
+AZ means Application of an Aluminium-zinc coating by immersing the prepared strip in a molten bath of Aluminium-zinc-silicon. The composition of the bath is 55% of aluminium,1.6% of silicon and the balance zinc. So SGLC400 means hot dip 55% Aluminium-Zinc alloy coated,high strength general usequality material.
SGLC400 material steel have coil, strip, sheet condition, thickness is from 0.25-2.3mm.
SGLC400 steel coating finish is N(Normal spangle) or M(Minimized spangle)
SGLC400 steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
SGLC400 steel Surface treatment C (Chromization treatment) , NC (non Chromization treatment) ,M (non treatment) O (oiled), X (non oiled)
SGLC400 steel Coating mass are: AZ70,AZ90,AZ120,AZ150,AZ170,AZ185,AZ200
SGLC400 steel mechanical property:
Proof strength should be not less than 295 MPa
Tensile strength should be not less than 400 MPa
Elongation should be not less than 16%
