Tel : 0086-0371-86172891
Ask:
ANSWER:SGLCDD is a steel grade in Japanese standard JIS G 3321, SGLCDD is deep drawing quality steel material.The base material of SGLCDD is cold rolled steel sheet.
+AZ means Application of an Aluminium-zinc coating by immersing the prepared strip in a molten bath of Aluminium-zinc-silicon. The composition of the bath is 55% of aluminium,1.6% of silicon and the balance zinc. So SGLCDD means hot dip 55% Aluminium-Zinc alloy coated,deep drawing quality material.
SGLCDD material steel have coil, strip, sheet condition, thickness is from 0.40-1.6mm.
SGLCDD steel coating finish is N(Normal spangle) or M(Minimized spangle)
SGLCDD steel Surface quality A (As coated surface) , B(Improved surface), C(Best quality surface)
SGLCDD steel Surface treatment C (Chromization treatment) , NC (non Chromization treatment) ,M (non treatment) O (oiled), X (non oiled)
SGLCDD steel Coating mass are: AZ70,AZ90,AZ120,AZ150
SGLCDD steel mechanical property:
Proof strength not specified
Tensile strength should be not less than 270 MPa
Elongation should be not less than 29%