Tel : 0086-0371-86172891
Tel : 0086-0371-86172891
ASK :
ASNSWER: SA1E is a Hot dip Aluminized steel material grade under JIS G3314 standard, SA1E also should be called Aluminium-Silicon(AS) steel, because it’s surface coating is 92%-89% Al + 8%-11% Si.
SA1E Aluminized steel have three level Surface quality, they are : As coated surface (A), Improved surface (B), Best quality surface(C). Usually the standard surface quality we supplied is Level B.
SA1E Aluminium-Silicon(AS) Coating masses are : AS40, AS60, AS80, AS100, AS120. However the Surface treatment are C,M,O,X
SA1E steel chemical composition % by mass max
|
C |
Mn |
P |
S |
|
0.10 |
0.45 |
0.03 |
0.03 |
SA1E is the drawing quality Aluminized steel, so it request a strict Elongation rate data.
During the thickness 0.4mm-≤0.6mm Elongation should be not less than 34%
During the thickness 0.6mm-≤1.0mm Elongation should be not less than 36%
When the thickness Above 1.0mm, Elongation should be not less than 38%
